.jpg)
-
* Phù hợp các tiêu chuẩn:
- JIS K6268, JIS K6350 (Cao su)
Amazing precision and performance!
- JIS K7112 (Nhựa)
- ASTM D297-93-16 (Cao su)
- ASTM D792 – OO (Nhựa)
Unique test-tank & housing-architecture. -
- Relative Density measurement for the Rubber & Plastic. Suitable for the quality control!
- Housing-architecture Protected the measuring against Over-load and Wind and Test-tank.
- Realize High Quality and High Precision 0.01g.Tuning-fork sensor adopted to the Subaru telescope is used.
- Change the weighing-pan, could be used as Precision balance 600g/0.01g.
- High-accurate weighing is maintained by built-in reference weight. (DME-220H only)
1. The water temperature measuring and storing
Do the measurement of the water temperature. Then, set it to the balance. Accurate Relative Density measurement is done by the compensation by the refenence water temperature.
2. Weight a sample in the air, and storing
Load the sample on the Folding weighing-pan. When the weight in the air is indicated, push the Measure-key, and store to the balance the weight data.
3. Weight a sample in the water, and storing
Load the sample on the underwater Weighting-pan. When the weight in the water is indicated, push the Measure-key, and store to the balance the weight data.
4. The relative density and volume indication
The value of the relative density and the volume can be seen with the Mode-key. The delta mark points the symbols of the relative density or the volume on the display panel.
Hydrometer Kit. (Option)
In case of the lighter sample than the water
Cover the sample with attached Underwater Sample Holder, and measure it.
