- JIS K6268, JIS K6350 (Cao su)
- JIS K7112 (Nhựa)
- ASTM D297-93-16 (Cao su)
- ASTM D792 – OO (Nhựa)
Amazing precision and performance!
Unique test-tank & housing-architecture.
Relative Density measurement for the Rubber & Plastic. Suitable for the quality control!
Housing-architecture Protected the measuring against Over-load and Wind and Test-tank.
Realize High Quality and High Precision 0.01g.Tuning-fork sensor adopted to the Subaru telescope is used.
Change the weighing-pan, could be used as Precision balance 600g/0.01g.
High-accurate weighing is maintained by built-in reference weight. (DME-220H only)
1. The water temperature measuring and storing
Do the measurement of the water temperature. Then, set it to the balance. Accurate Relative Density measurement is done by the compensation by the refenence water temperature.
2. Weight a sample in the air, and storing
Load the sample on the Folding weighing-pan. When the weight in the air is indicated, push the Measure-key, and store to the balance the weight data.
3. Weight a sample in the water, and storing
Load the sample on the underwater Weighting-pan. When the weight in the water is indicated, push the Measure-key, and store to the balance the weight data.
4. The relative density and volume indication
The value of the relative density and the volume can be seen with the Mode-key. The delta mark points the symbols of the relative density or the volume on the display panel.
Hydrometer Kit. (Option)
In case of the lighter sample than the water
Cover the sample with attached Underwater Sample Holder, and measure it.
Model
Readability (density)
Readability (volume)
Hydrometer option
Data store condition
Calibration
DME-220E
0.01g
0.01cm3
Not-avairable
Fixed condition
External reference weight
DME-220HE
0.001/0.01g
0.001/0.01cm3
Option
3 type selectable
Built-in Weight
Capacity
(density measurement)
220g
Capacity
(weight measurement)
600g
Readability
0.01g
Measuring method
Underwater Replacement Method (JIS Z8807)
Printer Output
Standard
Size
230 × 180 × 170mm
RS-232C Output
Rechargeable battery
(12 Hour Charge, 32 Hour Operable)
* Battery cannot be used with the output as same time.
Hydrometer Kit (For DME-220H only
Tag: cân tỷ trọng DME Shiko Vibra, can ty trong DME Shiko Vibra,, can dien tu DME Shiko Vibra, cân điện tử DME Shiko Vibra, can ky thuat DME Shiko Vibra,, cân kỹ thuật DME Shiko Vibra,
.jpg)
